Energy Savings Tips for Commercial Buildings

An abundance of technology upgrades offer ways to reduce energy use in commercial facilities.

Trimming energy consumption in commercial buildings is an objective in the campaign to curb fossil fuel use and reduce greenhouse gas emissions that is attainable by upgrading mechanical systems with improved technologies.

There are choices for reducing energy use in almost all functional areas of a commercial facility, according to energy expert David Wylie, vice president of ASW Engineering Management Consultants of Tustin, Calif., “as long as owners are willing to look beyond initial costs to see the long-term gains in lower utility costs, less downtime and increased building equity.”

Wylie outlined the latest developments in technologies for commercial building energy efficiency in seven broad categories during a daylong workshop held at the California Center for Sustainable Energy in San Diego, Calif.

Control the Lighting

Commercial energy consumption for lighting varies greatly, ranging from 35 to 75 percent of a business’s total use. Unfortunately, many buildings – both old and not so old – have outdated and over-designed lighting. Light levels in 50 to 60 percent of work areas are higher than necessary, Wylie said.

Fluorescent lighting remains the most widely used in commercial applications because lamps are able to closely mimic daylight and have high light output perfect for seeing details. Today’s high-efficiency T-5 tubes are so bright they can be used in high-ceiling applications that previously called for high-pressure sodium lamps. The most efficient fluorescents incorporate induction coil technology to excite the tube’s mercury vapors, eliminating electrodes that burn out and boosting the lamp’s lifetime up to 100,000 hours – that’s a 25-year service life.

Many newer technologies offer specific business advantages. Ceramic metal halide lamps cast high-quality natural colors ideal for retail displays, art galleries and foyers. Long-lasting and energy-saving light emitting diodes (LEDs), once relegated to exit signs and trim lights, are now manufactured to replace other lighting. LEDs are made as tubes for fluorescent fixtures (without ballasts), providing excellent factory and office lighting. They are also offered as halogen MR16 bulbs for track lighting and as PAR 38-style floodlights.

Effective lighting control is critical. Electronics are available to oversee time scheduling, occupancy sensing and light-level adjustments for daytime dimming. In one retrofit case study, each occupancy sensor saved about $170 per year with a payback of 13 months.

Move the Air

Heating, cooling and ventilating (HVAC) are responsible for about half of a commercial building’s energy use. In the United States, buildings are split about evenly between those with central plant chillers and those with self-contained packaged air handling units, Wylie said.

Over the years, energy performance ratings of packaged air handling units have varied dramatically as the Department of Energy (DOE) and industry associations wrestled over definitive efficiency standards. The bottom line is that energy improvements are frequent, with top-performing models today up to 15 percent more efficient than in 2006.

A central plant integrates systems for heating and cooling into the entire building. Chillers, boilers and pumps are usually in the basement with air-handling units and ductwork throughout and a cooling tower on the roof. While energy savings can be realized throughout a central plant, chillers offer the greatest potential for savings. According to the Environmental Protection Agency (EPA), the cost of replacing an older chiller with a newer, energy-efficient unit is quickly offset by lower maintenance and electricity costs. Virtually all chillers are custom made, so there are plenty of options.

Store the Energy

Thermal energy storage is an adjunct to a central plant system that makes chilled water or ice during off-peak electricity demand periods at night and uses it during the day to supplement chiller production and serve air conditioning needs. Chilled water storage is pretty simple – a well-insulated tank and a pump system. Ice storage requires a more complex tank and an industrial-sized ice-making unit, with capacities up to several hundred tons.

According to the Electric Power Research Institute, thermal energy load shifting can lower overall HVAC operating costs by 20 to 60 percent. Other advantages are that you can reduce chiller size and achieve the same cooling with lower operating costs.

Check Your Motors

Almost every operation in a commercial building requires a motor from HVAC and elevators to air compressors and machinery. Typically, a motor is installed and kept running, but seldom replaced. If a motor is more than 15 years old, it’s likely a newer model with better design and improved materials will yield energy savings. Consider that an older induction motor for a small, constant-speed fan may consume 400 watts whereas one with modern components will pull only 60 to 80 watts, Wylie said.

The key for savings is the IEEE 841 rating that denotes a premium motor that meets or exceeds DOE energy efficiency requirements. Recently, some manufacturers started applying labels showing the motor’s efficiency rating and operating costs. The EPA is considering implementing a comprehensive ENERGY STAR labeling program for industrial motors.

Manage the Energy

A broad suite of tools is available to operate buildings efficiently using automated controls and information technology to monitor and control energy-consuming devices. Most medium-sized and large buildings have energy control systems for switching on and off, verifying functions and alerting malfunctions, but more sophisticated technologies are available that provide electric load leveling, real-time optimization and extensive data reporting.

Taken to its highest level, energy management becomes a totally integrated system, called enterprise resource planning, that, over the Internet, shares information and control strategies among various parties from building, energy and financial managers to facility technicians and third-party service providers. Regardless of the methodology, good energy management will minimize demand, save energy and reveal when systems fall below intended performance levels, Wylie said.

Make Your Power

Large buildings and smaller ones requiring higher load demands can consider generating and storing electricity onsite, which is known broadly as distributed generation. Small distributed generation units, typically less than 30 megawatts, reduce peak demand and serve as backup. Some systems, called cogeneration, increase efficiency by using the waste heat of power production to heat water and warm spaces. Wylie gave the example of an 80-bed skilled nursing facility with a cogeneration system that saves over $180,000 in annual energy costs.

Distributed generation comes in two varieties: fuel-based devices, such as gas engines, turbines and fuel cells, and renewable sources, including wind, solar and hydroelectric. Fueled systems typically run on fossil fuels, but also can use regenerative sources such as bio, landfill or sewage gases. Recent advances in fuel cells are making them the rising technology because of their extremely high efficiency (80 to 90 percent with cogeneration) and minimal environmental pollutants.

Solar electric, or photovoltaic (PV) technology, is the leader among onsite renewable generation strategies. Grid-connected PV systems, ranging from a few kilowatts up to several hundred kilowatts, provide supplemental power and offset peak demand. The installed cost of PV is decreasing as the market grows; and state and utility rebate programs and federal tax credits considerably reduce initial outlay.

Wylie’s Wisdom

Every business owner and building manager needs to get educated about their energy upgrade options and work with the appropriate staff experts and outside consultants to create a plan and perform cost-benefit analysis. “It’s a complex set of issues, but there are opportunities in all commercial operations for energy efficiency and bottom-line savings through updating building technologies,” Wylie said.

photo: AEngineer

Have any Question or Comment?

10 comments on “Energy Savings Tips for Commercial Buildings

P Valenta

Chilled water storage is pretty simple – a well-insulated tank and a pump system. Ice storage requires a more complex tank and an industrial-sized ice-making unit, with capacities up to several hundred tons.”

Water storage is not more simple than ice in my opinion. One must design the tank to keep the thermocline within the tank to make sure the storage is not depleted prematurely. One could use the empty tank method but it add complexity. Water treatment and maintenance is more complex and if the storage cannot be used for whatever reason, the tank is stranded asset.

Ice storage takes up 1/10th the space can be applied just as easy as water storage. In fact is can be more forgiving and provide better redundancy and the tanks can be used again at different locations if the building is put out of service for whatever reason.

More times than not water storage is applied in very large projects and data centers and ice is applied in churches, schools, and office applications, and they compete in the hospital and college campus markets.

Saving energy-and energy costs-for businesses doesn’t have to be complicated or expensive. Advice from Clean Techies –

This comment was originally posted on Twitter

Very nice tip to save energy. I am a truck owner, this tip will be very helpful for many poor to save there light bill, but mainly this tip will be more helpful when electric vehicle will be lauched because vehicle charging will need much energy. Thanx for giving such helpful tip.

Ford Commercial Trucks

Nice Tip,

It is cool tip to save energy. It will be very helpul for poor people as they can save some money as less bill comes from using this tip.Electric car will also be benefited from this tip.

Envirobrite’s High Five is ideal for general purpose lighting in areas where ceiling height exceeds 15 feet, such as warehouse facilities, assembly areas, gyms, hangars, transportation garages, loading and staging areas.

It turns on instantly, delivers more appealing light, and produces incredible energy savings. HighFive typically uses 52% LESS energy than HID fixtures and allows for up to 68% better performance.

Excellent post! Covering some of the techniques that can help in energy saving. Building management systems are more important due to the fact that several countries (like UK) have now adopted laws on energy management and carbon reduction commitment.. Small and medium companies are the ones that are currently struggling with managing their energy usage.. this post will definitely help.

Yeah I cannot believe how high my bill was this time around, so these are awesome tips that anyone can try.

BC Powersports

Great blog, with a ton of good info that I hadn’t considered before…..Great information for commercial builders and owners who is keen on energy saving. Thanks for the share!!!

Commercial Building Companies

Commercial energy consumption for lighting varies greatly, ranging from 35 to 75 percent of a business’s total use. And I am totally agreeing with your statement. I have found many new things. I appreciate it.

Commercial window tinting in Los Angeles California help to reduce energy bills up to 60% and come with other benefits beside window tinting shade and color like UV shield technology taking the skin burning sensation away from you

Comments are closed for this post !!
Skip to toolbar